Submersible pump manufacturer tells you submersible pump little knowledge

Use common sense knowledge of submersible pump

Submersible pump manufacturer: Submersible pumps are widely used in various industries, agriculture and domestic water transportation. Before using submersible pumps, we need to understand its relevant common sense to avoid unnecessary losses: submersible pumps cannot be dehydrated and operated under anhydrous conditions. The test run time shall not exceed 5 minutes. During the pumping process, if the water level continues to drop, pay attention to the pump body not working above the water surface.

2. It cannot be restarted immediately after shutdown. It is necessary to wait until the water in the pipeline has returned. If the water cannot be discharged after startup, stop immediately to find out the cause and eliminate it.

3. It should be used near the designated elevator; the inner diameter of the matching rubber pipe, iron pipe or canvas pipe should meet the technical requirements.

4. When the submersible pump is put into the water or raised from the water surface, grasp the sling and do not pull the cable. If you want to carry, disassemble or repair, you should cut off the power first.

5. When diving, it should be lifted vertically, not lying down, not stuck in the mud. Submersible pump manufacturer

6. The submersible pump should not be started frequently. When the pump is in use, bamboo mesh or barbed wire can be used outside to prevent weeds in the water from blocking the mesh of the submersible pump or blocking the impeller of the pump.

The pumps of submersible pump manufacturers have a variety of testing methods in the production process. The finished product will be tested in the actual operation of the product. Test the relevant parameters of the actual operation of the pump: current, voltage, speed, flow, head, normally closed point current, normally open point current, etc., can effectively ensure the quality of the pump. To ensure that customers in the use of the process of safe, stable, long-term operation. Uses and features: Stainless steel submersible pump (ZJQH) is a submersible pump for wells that is directly connected to the pump and directly submerged into the water. The structure is slender. Single-stage or multi-stage upper pump type water-filled wet three-phase asynchronous motor submersible pump.

The pump products produced by submersible pump manufacturers are mainly developed for agricultural irrigation, sprinkler irrigation, industrial and civil building drainage systems, suitable for ponds, fish ponds, water towers, and high-rise water supply and fountains. Conditions of use: rated frequency 50HZ/60HZ, rated voltage 380V/660V1140V/3KV/6KV and other three-phase AC power supply. The electric pump should be immersed in water operation, diving depth requirements completely immersed in liquid.